Click Image for Gallery
water electrolysis type hydrogen Gas generator
Product Details:
Capacity | 1 - 600 Nm3/hr |
Hydrogen quality | 99.8 % |
Nitrogen quality | 0.2 % |
Dew Point | (-)76 deg C |
Technology used | Bi-polar with pressurization |
Molsieve is marketing PERIC make Hydrogen Gas Plants who have made Hydrogen Plants of capacities ranging from 0.5Nm3/hr to 600Nm3/hr. Up to now, the maximum hydrogen capacity of a single electrolyzer reaches to 600Nm3/h which is the largest one all over the world. Successively the hydrogen purification system have been developed and marketed for hydrogen generation plants, all of them are widely applied in different industrial sectors such as electron, electric power, steel plant, metallurgy, chemical industry, building materials, new energy resource, spacecraft, meteorology, etc. In order to satisfy the market, new kinds of plants have also been developed such as hydrogen generation plant by methanol cracking, hydrogen generation plant from natural gas, hydrogen generation plant by ammonia cracking, With the continuous and stable development of technology and products for more than 4 years, there have been complete products of hydrogen generation plants with different models and types to meet different requirements.
The Technology :
- The electrolyser is designed as bi-polar technology with pressurization. The performance of gasket is an important factor which ensures there is no leakage in the electrolyser. The gas-lye treater is of skid-mounted type with simple process flow, in convenience with assembly, operation and maintenance.The H2 generator is automatically controlled through PLC programming, with high reliability and remote control, HMI interface friendly to the operator with safety and convenient operation.
- H2 purity > 99.8%; O2 purity > 99.2%.
- H2/O2 purification system by catalyst is specially developed and designed for the gas generated by water electrolysis. As per the customer requirements, there are two kind of purification system, e.g. Dual Bed Adsorber type & Triple Bed Adsorber type.
- With these two different types, the H2 purity is better than 99.999% and dew point better than -70 Deg. C, in case of the chilled water to be available, the dew point can be better than (-) 76 Deg. C.
- One key feature of such system is no loss of purified gas due to the special design. So the impurities can be less than 1 PPM of O2 in purified H2 or 5 PPM of H2 in purified O2. The switch-over among these dryers are fully automatic as per PLC control logic.
Though both types of Gases can be provided however Molsieve restricts themselves to only Hydrogen gas.
- Containerised type plants can also be supplied depending upon Customer’s requirement.
- The Hydrogen produced is available up to 30 Bar pressure & can be stored as per Government’s rules & regulations.
Other Details:
MODEL NO. | CAPACITY | GAS QUALITY |
MN-H2-COM (Commercial grade) | 1-600 NM3/HR Single unit | H2: 99.8%, N2 : 0.2% Dew Point (-) 76 0C |
MN-H2-HP (High purity grade) | 1-600 NM3/HR Single unit | H2: 99.9999%, N2: 1 PPM Hydrogen Gas Plants |