Temperature Controller with Soak Timer

Product Details :

• Size 48(w)x48(h)x85(d)mm (Model :- WTC-2301-ST)
• Size 72(w)x72(h)x45(d)mm (Model :- WTC-2101-ST)
• Size 96(w)x48(h)x65(d)mm (Model :- WTC-2001-ST)
• Size 96(w)x96(h)x65(d)mm (Model :- WTC-2201-ST)

• Microcontroller based
• Four digits dual display
• Supply: 100-260 VAC
• Input: J, K or RTD selection
• Output: Heater-Relay Contact or SSR, Timer-Relay Contact
• PID: Auto tune or On/Off Control selection
• Range: J type- 0-750ºC,
• K type- 0-1200ºC,
• RTD: 1 type 0.0 to 400.0ºC,
• RTD type 0 to 400ºC
• Accuracy of 0.5% of full scale
• Soak Timer Auto or Manual Load selection
• Soak time adjustable up to 9999 minute
• Power down memory selection
• End message at process complete
• Temperature as per range adjustable in set mode.
• Alarm 0.0 to 25.0 or 0 to 250 as per range adjustable
• Ct 1 to 60 for SSR output & 10 to 120 second for Relay output adjustable
• Auto tuning required for pb, It & dt value
• Hysteresis 0.2 or 2ºC to 25.0 or 25ºC adjustable as per range selection for RTD
• Hysteresis 2 to 250ºC adjustable as per range selection for J & K Type
• Open display if Sensor break & -rEV display if connections reverse.
• Relay trip if sensor breaks, connection open or connection reverse.
• Calibration Error correction by a front key switch (No preset setting)
• Enclosure material: ABS Or Polycarbonate
• Operating Ambient Temp:0ºC to 55ºC.
• Configure link at a Back terminal to avoid unauthentic entry

Additional Information:

• Item Code: WTC-2XXX-ST