Temperature Controller - Two Set Point

Product Details :

• Size 48(w)x48(h)x85(d)mm (Model :- WTC-2301-2SP)
• Size 72(w)x72(h)x45(d)mm (Model :- WTC-2101-2SP)
• Size 96(w)x48(h)x65(d)mm (Model :- WTC-2001-2SP)
• Size 96(w)x96(h)x65(d)mm (Model :- WTC-2201-2SP)

• Microcontroller based,
• Four digits, Dual display
• Supply 100-260 VAC
• Two Setpoint
• Input J, K or RTD selection
• Output: 2. Relay Contact or SSR
• On/Off Control
• Heating Control
• Range: J type 0-750°C
• K type 0-1200°C
• RTD.1 type 0 to 400.0°C
• RTD type 0 to 400°C
• Accuracy of 0.5% of full scale
• Temperature As per range adjustable in set mode.
• Alarm 0.0 to 25.00 or 0 to 250 as per range adjustable
• Hysteresis 0.2 or 2 to 25.0 or 25 adjustable as per range selection for RTD
• Hysteresis 2 to 250 adjustable as per range selection for J & K Type
• Open display if Sensor break & -rEV display if connections reverse.
• Relay trip if sensor breaks, connection open or connection reverse.
• Calibration Error correction by a front key switch (No preset setting)
• Configure link @Back terminal to avoid unauthenticated entry
• Enclosure material: ABS Or Polycarbonate
• Operating Ambient Temp:0ºC to 55ºC.

Additional Information:

• Item Code: WTC-2XXX-2SP