UniStim Combination

Product Details : 

Therapeutic U.S. involves the use of high frequency acoustic energy to produce thermal & non-thermal effects in tissue. The effectiveness of U.S. in a variety of musculoskeletal conditions includes Periarticular inflammatory conditions such as (Bursitis, capsulitis, epicondylitis, tendinitis etc.) other chronic inflammatory conditions (Rheumatoid Arthritis, Ankylosing Spondylitis, Non-specific musculoskeletal pain, Low Back Ache, Frozen shoulder, Osteo-arthritis) etc.

*US + IFT Combination therapy involves simultaneous application of ultrasound with interferential therapy ensuring accurate localisation of treatment to increased accuracy / effectiveness in treating deeper lesions, treating trigger points.

Specification

• Mains Power - 110V – 270V AC, 47 to 63 Hz
• Weight - 2 kg
• Dimension - L 25 × B 25 × H 12 cm
• Electrical Safety Class - Class 1, type B
• Standard Accessories
• 11181 Four Rubber Electrodes (2.5” × 2” Large)
• 11182 Four Rubber Electrodes (2” × 2” Small)
• 11183 One Stim Wire (RR + BB)
• 11184 Two Large Velcro Straps
• 11185 Two Small Velcro Straps
• 11186 One Patient Interrupt Switch
• 11187 One Pen Electrode + 3 Tips
• 11188 One 5 Amp AC Power Cord
• 11189 One Gel Bottle 250gm

Application

• Interferential Therapy
• Carrier Frequency - 2, 4, 6, 8, 10 Khz
• Base - 30 Hz (1 - 500 Hz)
• Sweep - 100 Hz (1 - 500 Hz)
• Sweep Program - Linear / Trapezoidal / Non-Linear
• Sweep Time - 4 - 8 - 12 Second
• Output Current - 0 - 100 mA
• Save Setting - Yes / No
• Intensity Selection - Both Channel Selection at a time after START for IFT
• Intensity Balance Selection - One at a time by using SELECT Key
• Intensity Control for 2P Premodulator / Russian Current One at a time by using SELECT Key
• Russian Current
• Burst Frequency - 50Hz (10-100Hz)
• Burst ON/Off Time - 5 Sec (1-60 Sec)
• Save Setting - Yes / No
• TENS - Continuous
• Frequency - 30 Hz (2 - 999 Hz in step of 1 Hz)
• Pulse Width - 200 µS (20 to 800 µS in step of 10 µS)
• Save Settings - Yes - No
• TENS - Burst
• Frequency - 30 Hz (2 - 999 Hz in step of 1 Hz)
• Pulse Width - 200 µS (20 - 800 µS in step of 10 µS)
• Burst Time - 5 Secs (2 - 10 Secs in step of 1 Sec)
• Burst Ramp Time - 0.5 Second
• Save Settings - Yes - No
• Auto TENS (Linear / Trapezoidal / Non Linear)
• Base Frequency - 30 Hz (2 - 500 Hz in step of 1 Hz)
• Pulse Width - 200 µS (20 - 800 µS in step of 10 µS)
• Sweep Frequency - 100 Hz (2 - 500 Hz in step of 1 Hz)
• Sweep Time - 4 - 8 - 12 Second
• Save Settings - Yes - No
• Galvanic - Plain
• Direct DC Current
• Save Settings Yes - No
• Galvanic Intermittent
• Pulse Width - 100 mS (30 - 300 mS in step of 10 mS)
• Off Time - 1 Sec (0.5 - 6 Secs in step of 0.5 Sec.)
• Save Settings - Yes - No
• Faradic - Plain
• Frequency - 50 Hz (Fixed)
• Pulse Width - 0.7 mS (Fixed)
• Save Settings - Yes - No
• Faradic - Surge
• Frequency - 50 Hz (Fixed)
• Pulse Width - 0.7 mS (Fixed)
• Surge On/Off Time - 5 Sec (1 - 10 Sec in step of 1 Sec)
• Surge Ramp Time - 0.5 Sec
• Save Settings - Yes - No
• Galvanic Diagnostic & Therapeutic Int
• Pulse Frequency - 1Hz
• Pulse Width - 300 mS. (.01, .03, .1, .3, 1, 3, 10, 30, 100, 300, 1000 mS.)
• Off Time - 1 Sec. (0.5 - 6 Secs. in step of 0.5 Sec.)
• Save Settings - Yes - No

Special Feature -

• During treatment time also, provision provided to select pulse width by using SELECT key & thereby enable to vary pulse width using “UP” & “DN” Keys.
• Iontophoresis
• Direct DC Current
• Save Settings - Yes - No
• Ultrareiz Current
• Frequency - 143 Hz. (Fixed)
• Pulse Width On Time - 2 mS. (Fixed)
• Pulse Width Off Time - 5 mS. (Fixed)
• Save Settings - Yes - No
• Diadynamic
• MF (50 Hz Halfwave) DF (100 Hz Fullwave)
• CP (Alter. of 50 Hz & 100 Hz)
• LP (Auto. linear of 50 Hz & 100 Hz)
• Save Settings - Yes - No
•