Petrol-Cum Kerosene Engine Core Drilling Machine

Product Details:

Machine Type	Automatic
Power Consumption	3 to 4 HP
No-Load Speed	3000 RPM
Diameter	Upto 150mm
Depth	300 mm
Block Size	300 x 300 x 300 mm

Core Drilling Machine Petrol-cum Kerosene Engine the machine shall be made from steel and shall be designed for laboratory coring in Concrete, Tiles, Asphalt, Paving Rocks and other similar hard materials either horizontally, vertically up and vertically down in inclined position. Pavement core drill shall be provided with hand operation rapid’ screw feed thru level drive with built-in ball bearings, water swivel shall be totally enclosed and mounted on the drill spindle. The drill spindle shall be of floating on tapered roller bearings shall be driven thru level gears. The drill drive shaft shall be mounted on the swivel base for angle drilling of 360 degrees for one setting i.e. in all direction. The drill shall be powered by petrol/kerosene run, air cooled 4 strokes single cylinder engine developing 3 to 4 H.P. at 3000 R.P.M. The drive from engine to drill head shall be thru V belts and sprocket speed reducer with a standard reduction 8:1 and totally enclosed in belts guards and sealed. The engine shall be able to start with petrol and later on shall be able to start with petrol and later on shall be able to run on kerosene oil. The engine is Enfield make with ISI certification Mark. The drill shall be provided with gear type pump driven off the drill by V-belt and designed for 1.25 gallons per minutes and the pump shall be complete with suction and delivery hoses and with other controls. The drill shall have hand towing attachment and leveling screws to facilitate easy shifting is and setting. The machine shall be able to drill cores upto 150mm in diameter and 300 mm in depth. The unit shall be portable in mobile type of sturdy base, with a pillar support, and which shall be provided with a rod for adjusting the height and penetration assembly, counterweight and swivel are also provided. The unit shall be supported on M.S. Wheels for easy mobility. Leveling screws shall be fitted on the base. It shall have a suitable grip for holding the rock or block of about 300 x 300 x 300 mm in position for taking out cores of the required size. Core drilling Machine without cutter Petrol-cum-Kerosene Oil 150 x 300mm.