Three Cylinder Four Stroke Petrol Engine Test Rig

Product Details:

Description:-

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements. Provision for mores test is done.
• Experimentation/Learning Objectives
To determine specific fuel consumption.
• To determine Brake Horse Power.
• To determine Brake Thermal Efficiency.
• To determine mechanical efficiency
• To determine indicated thermal efficiency
• Morse Test
Utilities Required
• Electric Supply : Single Phase, 220 V, 10Amp.
• Continuous Water Supply : 10 LPM Approx. at ½ kg/cm2 Pressure for Engine cooling
• Fuel : 20 Ltrs. (Petrol)
• Floor Area : 3m X 2m
• Battery Unit : 12 Volt 88 Am
Technical Details
• Engine : three/ four  Cylinder, Four stroke, water cooled Petrol Engine:- Refurbished engine , make maruti-800 , 3 cylinder, 4 stroke petrol , BHP 37 at 3600 rpm , capacity 796 cc , torque 59@ 2500 rpm , water cooled , without t/m ( carburetor )
• Type of Loading : rope brake dynamometer , electrical brake dynamometer, hydraulic brake dynamometer, eddy brake current dynamometer
• Fuel Measuring System : Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement.
• Air Intake Measuring System : Air tank fitted with orifice and water manometer.
• Measurement of Heat Carried : It consist of inlet outlet piping with away by cooling water flow control valve, water meter to measure the rate of flow of cooling water Temperature Sensors are provided to measure the Temperature of Inlet & Outlet
• Temperature Measurement : Digital Temperature Indicator with multi-channel switch
• Temperature Sensors : RTD PT-100 type
• RPM measurement : RPM Indicator with Proximity sensor.
• Exhaust Gas Calorimeter : Made of Stainless Steel including the body & the tube for cooling water circulation and designed to get maximum temperature difference. The body of the calorimeter is insulated on all sides to prevent heat losses due to radiation.
• Panel Board Arrangement : Panel Board Arrangement consisting of ignition & starting switch, a high voltage knife switch assembly for cutting off each cylinder for Morse test.
• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.
• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.