Environmental Air Calibration Standards
Product Details :
Certified and primary calibration gas standards are used for instrument calibration and other monitoring and measurement applications where either use of an EPA Protocol calibration standard is not required or an EPA Protocol standard is not available.
As with all Spectra environmental standards, Certified Environmental Calibration Standards are produced gravimetrically directly traceable to NIST standards in cylinders that have been individually passivated by the proprietary Spectrashield™ process.
In addition, where NIST or comparable international standards are available, analysis are performed utilizing these international standards. Where standards are not available from international metrology organizations, Spectra employs in-house developed analysis technology and standards to provide you with the most accurate and reliable standards available.
Each cylinder is individually analyzed and supplied with a Certificate of Analysis (C of A).
TYPICAL SPECIFICATIONS
CERTIFIED STANDARDS
PRIMARY STANDARDS
| Concentration Range | Blend Tolerance | Analysis | Blend Tolerance | Analysis |
|---|---|---|---|---|
| < 100 ppb | Consult factory | Consult factory | Consult factory | Consult factory |
| 100 ppb to 999 ppb | ± 20% | ± 10% | ± 10% | ± 5% |
| 1 ppm TO 9999 ppm | ± 10% | ± 5% | ± 5% | ± 1% |
| 1% | ± 5% | ± 2% | ± 1% | ± 0.02% absolute |
Certified and primary calibration gas standards are available in size 2A, 3A, and 4A aluminum cylinders and where appropriate in size 2, 3, and 4 internally polished and passivated steel cylinders.
All certified and primary calibration gas standards are filled to the maximum pressure and volume as determined by the cylinder, the vapor pressure of the mixture, or restrictions due to flammable-oxidizer (flam-ox) requirements.
| Component | Balance | Available Concentrations |
| Ammonia(NH3) | Zero Air | 25 ppm to 6% 2 |
| Ammonia(NH3) | N2 | 1 ppm to 10% 2 |
| Benzene (C6H6) | Zero Air | 1 ppm to 1000 ppm 1,2 |
| Carbon Dioxide(CO2) | Zero Air | 1 ppm to 20% |
| Carbon Dioxide(CO2) | N2 | 1 ppm to 20% |
| Carbon Monoxide(CO) | Zero Air | 500 ppb to 3% 2 |
| Carbon Monoxide(CO) | N2 | 500 ppb to 20% |
| Ethylene Oxide (C2H2O) | N2 | 1 ppm to 1%1 |
| Hexane (C6H10) | Zero Air | 100 ppb to 5000 ppm1 |
| Hexane (C6H10) | N2 | 10 ppb to 5000 ppm2 |
| Hydrogen Chloride (HCl) | N2 | 10 ppm to 1% |
| Hydrogen Chloride (HCl) | Zero Air | 10 ppm to 1% |
| Hydrogen Sulfide (H2s) | Zero Air | 5 ppm to 1000 ppm |
| Hydrogen Sulfide (H2s) | N2 | 1 ppm to 3% |
| Mercury (Hg) | Zero Air | 2 µg/m3 to 60 µg/m3 |
| Methane (CH4) | Zero Air/ N2 | 1 ppm to 2.5%2 |
| Methane (CH4) | N2 | 1 ppm to 10% |
| Nitric Oxide (NO) | N2 | 500 ppb to 2% |
| Nitrogen Dioxide (NO2) | Zero Air | 25 ppm to 0.5% |
| Phosphine (PH3) | N2 | 100 ppb to 1000 ppm |
| Propane (C3H8) | Zero Air | 10 ppb to 1%12 |
| Propane (C3H8) | N2 | 10 ppb to 25% |
| Sulfur Dioxide (SO4) | Zero Air | 5 ppm to 2% |
| Sulfur Dioxide (SO4) | N2 | 100 ppb to 1% |
| Sulfur Hexafluoride(SF4) | Zero Air | 1 ppm to 10% |
| Sulfur Hexafluoride(SF4) | N2 | 1 ppm to 10% |
| Toluene (C6H5CH3) | Zero Air | 1 ppm to 100 ppm1 |
| Toluene (C6H5CH3) | N2 | 25 ppb to 100 ppm1 |
| Vinyl chloride (C2H3CI) | Zero Air | 100 ppb to 2000 ppm1 |
| Vinyl chloride (C2H3CI) | N2 | 100 ppb to 2000 ppm1 |
1. Vapor pressure constraints will limit fill pressure/volume at higher concentrations of this standard
2. Flam/ox constraints will limit fill pressure/volume at higher concentrations of this standard.
Environmental Air Calibration Standards
- Views: 60
- Product Code: SBI0000041
- Availability: In Stock
- ₹0
Seller information
Spectro Biotek Instruments
- Spectro Biotek Instruments
- Delhi, India
- Business Type :Supplier
