PROGRAMMABLE PROFILE CONTROLLER - 9 STEPS

SPECIFICATION :

O) Microcontroller Based, Double Display

O) Supply 220 V AC

O) Input J, K or PT100

O) Single Program, Nine Step

O) Each Step Contain Temperature, Soaking Time & Ramp Setting

O) Ramp Selection: Time Base or Temperature Base (Temperature/Minute)

O) Time Base Ramp: Time Setting 0 To 1000 Minute (0= Natural Rise)

O) Temperature Base Ramp: Temperature/minute Setting 0.0 To 100.0 (0.0= Natural Rise)

O) Over Night Delay Timer( Optional)

O) Power Down Memory For Delay Time, Step Number & Soaking Time

O) Output: 1.) SSR / RELAY / 4-20mA, 

                  2.) Alarm Contact or Buzzer

O) PID or On/Off Control Selection

O) Heating Application

O) Range: J Type 0-750C

          K Type 0-1200C

          RTD.1 Type -50.0 to 400.0C

          RTD Type 99.9 to 400 C

O) Temperature As Per Range Adjustable In Set Mode.

O) Ct 1 To 60 For SSR Output & 10 To 120 Second For Relay Output Adjustable

O) Auto Tuning Require for pb, It & dt value

O) Soak Band To Enable Soaking Timer In This Band

O) Hysteresis 2 To 250c Adjustable

O) Control Temperature, Soak Time & Ramp Value With Step Number

O) Indication By INC. Key

O) Alarm Mute Facility By Decrement Key.

O) OPEn Display If Sensor Break & -rEV Display If Connections Reverse.

O) End Displays If Process Complete.

O) Relay Trip If Sensor Breaks, Connection Open Or Connection Reverse.

O) Calibration Error Correction By Front Key Switch (no Preset Setting)

Overview / Features :

Size Available In

• 96 X 96 | 72 X 72 | 48 X 48 MM

Available In BOD ( Heating & Cooling )