Programmable Process Controller
Product Details:
Digital Process Current (4-20 or 0-20 mA.) Indicator/ Controller” is a Microcontroller based, versatile instrument. This 16 OR 24 bit precision. Instrument is ideally suited for industrial and laboratory applications. 230V AC or External DC source can power this instrument.
Features:
Powered by AC or DC power source
6 digit seven segment LED display (0.56” or higher size as option)
16 AND 24 bit internal resolution (using state of the art Sigma/Delta ADC) or External 20,000 AND
2, 00,000 counts
Programmable sensor scan rate from 4 sample/sec to 100 samples/sec
Programmable Gain (digitally programmable instrumentation amp.)
Programmable resolution, over range and under range.
Easy to calibrate with Auto calibration.
Pass Word facility for calibration and to access the menus.
Facility to mask (or Hide) the menus which are normally not required.
Peak (Max.) and Valley (Min.) hold facility.
Accuracy of +/-0.02% full scale, +/- 1 count.
5 Volt excitation supply for the sensor. (Other voltages like 12V / 24V available as option)
Low burden resistance. (10 ohms)
0 to 50°C of operating temperature. Thermal Shift 60 ppm/°C 95% humidity at 40°C.
Compact size: 48 X 96 X 110 DIN size enclosure OR 96 X 96 X 110 DIN size enclosure
Options:
Relay-1 Independent Set Point or Relay-2 Independent set point or hysteresis or more than 2 relay up to 8 relays with independent set point or hysteresis RS 232 or Rs 485 Computer or PLC Interface. Look up table 4-20 mA output or 0-10V output PID loop output (In future)
Applications: Pressure sensor, Load sensor, DP Transmitters, Flow Sensor, Humidity Sensor, Tensile Load, Compression load, Thermocouples, AC/DC voltage-current measurements, Potentiometric Measurements, GC-HPLC measurements