Analogue Cum Computerized

Universal Testing Machines (Model: TUE-CN )

The DC valve is provided which directs oil flow either to analogue or computerized control panel. One can use one system at a time.

Both Analogue & Computerized control panel is provided.

Features for WinUTM Software :

• The Win UTM Software can run a variety of mechanical tests, recall data from previous test & prepare test report.
• Menu driven software for easy of use.
• Test Reports & Graphs can be sent directly to the printer via parallel port or USB Port.
• Storage & retrieval of test parameters.
• Display of load elongation (stress & strain are optional) at any instant through out the test.
• On line display of load Vs elongation or Stress Vs Strain characteristics during conduction of test. The plot is auto scaled & displayed.
• Selectable units (kN, kgf, lbf, mm, inch)
• Variable sample break detection.
• Load is indicated with a resolution of 0.01% of machine capacity for the entire measurement range of 2% to 100% of machine capacity.
• Elongation is indicated with a resolution of 0.1 mm.
• Provision of auto - Zeroing of Elongation at set pre-load.
• Tare load and Reset elongation facilities available.
• Auto - Detection of over load, over travel and specimen break. 0n detection of any of these conditions, the machine is automatically switched OFF.
• High precision sensors and encoders used for load and elongation measurement.
• Large storage capacity for storing data (upto 50,000 sets) on the computer.
• Provision for calculations of parameters such as load and elongation at yield, peak load and load at break. Veld stress, Ultimate stress etc. The Parameters to be calculated are user selectable.
• Test conditions, test data and test results are stored in a specific file based on aiiinique file structure.
• Built in facility for printing the test results and test graph from PC, A printer copy of consolidated test results conducted on a particular date can also be obtained. Graphs of Load Vs Crosshead travel, Load Vs Time, Crosshead travel Vs Time, Load Vs Extension, Stress Vs Strain etc. are available.
• Specific software for tensile, compression, Shear, Bend, TOR-Steel and other tests.
• If an Electronic Extensometer* is used, then proof stress values (from 0.1% to 1.0%) can be determined.
• If an Electronic Extensometer* is used, software prompts the user to remove Extensometer as soon as proof load is crossed. After removal of Extensometer, measurement of crosshead travel by the encoder cornmences and proceeds till completion of test. A combined auto scaled graph using Extensometer and encoder is available.