Manual Change Over Manifold System
Product Details:

Minimum Order Quantity	1 Piece
Maximum Inlet Pressure	250 BAR
Machine Type	Automatic
Brand	SAMPHIRE
Working Pressure	16 BAR
Maximum Pressure	16 BAR
Working output pressure	210 BAR
Capacity	500
Country of Origin	Made in India
Power Consumption	YES
Inlet connection	1/4" NPT FEMALE
Wall Thickness	10 MM

Features:
Set the outlet pressure as per requirement With outlet press Regulator
Inlet Pressure Gauge : 2 nos. of 0 – 210 Kg Gauge
Open outlet valve to use as per requirement

Setting Procedure:
Connect both cylinders with flexible pigtails
Open the cylinder 1 and apply the pressure of Cylinder 1 ( Line 1) to the manifold
Set the pressure through cylinder 1 regulator ( e.g. 7 kg)
Open the cylinder 2 and apply the pressure of cylinder 2 ( Line 2 ) to the manifold.
Set the pressure through cylinder 2 regulator ( e..g. 6 Kg.)
Set the outlet pressure as per requirement With outlet press Regulator
Open outlet valve to use as per requirement
Vent valve 1 and vent valve 2 is use to purge vent the gas Cylinder change Procedure :- if cylinder1cylinder got empty close the shutt off vale replace Cylinder with filled cylinder open the vent valve for few seconds to purge and close the valve repeat same procedure for cylinder 2 if .it get empty