Air circulation

Forced air circulation is done to maintain uniformity throughout the equipment. It is through circulation motors & blowers. The motors are mounted on the body from outside and only shaft is in the inner chamber. For safety dissimilar metal are used for rotating parts. Shaft and surrounding body is of SS; Blower is of Aluminum. Additionally rotating parts are safeguarded with guard grill.

Condition compressor unit

      Complete with blowers, circulation motors, dry heater, humidity system, evaporation (cooling) coil, and standby cooling coil (if applicable).

Humidity System

      Humidity is by steam injection. Humidity system consists of reservoir tank & humidifier tank, which is fitted with two nos

      The reservoir tank consists of a float valve to maintain the water level. It has to be connected to a continuous supply of soft water (preferably DM water). The reservoir tank consists of a safety float switch to detect the water level & give an alarm upon low water level.

      A safety float switch is also provided in the boiler tank to detect the water level & given an alarm upon low water level as well as cut-off the supply to the heaters

Facilities

      1 No. Access Port Hole, 75mm dia. with Silicone Closure, on side wall

      300X 300mm 5 Pane Viewing window, with illumination;     

      Trays SS304 Removable Loading Tray 

      Strip heaters in the door and window assembly Door Interlock,

      Drain for Condensing Water  Low Noise Design ( Noise absorbing material installed in the Compressor Compartment )