Direct Ultra
Product Details:
Our Direct Ultra Series of water purification systems offers an economical Type-I (Ultrapure grade), Type III (Lab grade) water in a single integrated table top/wall mounted sleek unit.
Highlights:
High recovery upto 60% of water with Polyamide T.F.C. membrane double RO Pass
Three Stage pre-filteration of 10µ/5µ/1µ/0.5µ,Iron filter, activated carbon,antiscalant. enough to protect and enhance the life of the precious cartridges
Most economical ultrapure grade water purification cost per liter as compared to other systems available in the market.
High quality T.F.C.Polyamide RO membrane >200 Dalton cutoff, Ion Rejection: >99%.
Feed Water Specifications: Potable Tap water with pressure  0.5 kg to 1.5 Kg (1-6 bar or better),Conductivity: upto 2000µS/cm, Chlorine:<3ppm, SDI <12, TOC<2000ppb, CO2: < 50ppm, Silica  <30ppm, Temperature: 4 to 40 Degree C,  System  include Pre-Filtration Cartridge (1,5 & 10 µ ) with Booster Pump and 01 Bio filter (point-of-use Biofilter of 0.2micron) to remove residual biologically active contaminants

Display	5.7” TFT Graphical Display
Type-I Grade Water:
Resistivity	18.2Mohm.cm at 25°C
Conductivity	0.05μS/cm
TOC	<5ppb*
Particulates (>0.1μ/ml)	<1
Bacteria(cfu/ml)	<0.1
Endotoxins/ Pyrogens(EU/ml)	<0.001
RNase(ng/ml)	<0.001
DNase(pg/μl)	<0.005
Product Dispense Rate	0.01 to > 2L/min (Programmable)
UF Membrane (NMWL/MWCO)	5000
End Point Filter	0.22micron(EFA:260cm2)
Deionization	Mixed Bed Resins
Type-III Grade Water:
Conductivity	<20μS/cm**
Product Flow Rate(L/hr)	5/10/15/20/25/30/35/40/50
Tank	Yes
Feed/RO/%Rejection Monitoring	Yes
Cell Constant K	0.01/0.1