Conical Impregnation System
Product Details:
The "Vacuum Conical Impregnation System" consist of three major sub systems: Impregnator unit : The impregnator has two conical cylinders, the inner cylinder and the outer cylinder. The outer chamber has lifting lugs for lifting and lowering of the outer chamber through material handling system. The inner chamber is welded to the base plate and the outer cylinder is welded to a SS 304L ring. The ring is fixed to the base plate. The inner surface of the conical chambers are coated with teflon. Pit Furnace : It is a muffled type made specifically for heat treatment of conical components after impregnation to a maximum temperature of 1000 degree C. The heaters are covered outside with glass wool / light weight brick insulation and finally covered with a outer casing. The heating elements are fixed all around the chamber. The top of the muffle has a insulated lid which can be swung away and brought back mechanically. Material Handling System : It consists of Hoist motor with chain pully arrangement of capacity 0.5 ton (500 kgs). Rail arrangement for X and Y movement. Controls for the hoist motor. The other components are the Vacuum pumping system, Measuring gauges, Liquid Tank, Hot air Blower, and Programmable Logic Controller (PLC) for the automatic operation of the impregnation system.