Click Image for Gallery
Cube Mould
Product Details:
Size | 50, 100 and 150 mm |
Usage/Application | Construction |
Operating Mode | Semi Automatic |
Capacity | 40 KN |
Product | Cube Mould |
Material | Cast Iron |
The Cube Mould,cubes of fresh concrete are made to test a variety of properties on the eventually cured and hardened concrete. Fresh concrete is subjected to a standard compaction regime in the cube mould and is then normally initially cured under specific laboratory conditions. The moulds are manufactured, subject to tight dimensional, hardness, square ness and surface finish requirements.
General Descriptions & Specifications :
Complete with base plate. The faces of the mould are machined flat to /- 0.02mm accuracy and finished to within /- 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel. The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage. The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth.
The base plate is attached to the mould by cleats .The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.
Cube Mould
- Views: 71
- Vendor: Scientific & Technological Equipment Corporation
- Vendor Type: Manufacturer, Supplier
- Product Code: STEC000019
- Availability: In Stock
- ₹0
Seller information
Scientific & Technological E
- Scientific & Technological Equipment Corporation
- Aaland Islands
- Business Type :Supplier, Distributor, Manufacturer
