Unibloc Moisture Analyzer

Product Features

Halogen heater

Long-life and high power halogen heater provides quick and accurate measurement.
The temperature can be changed from 50 degrees to 200 degree Celsius.
You can check sample status from window while measurement.

Data management and easy operation
Built-in USB port

The measure results can be transferred by USB cable.
If connect with PC by USB, needs USB driver.

Large pan size: 95mm dial

MOC63u has large pwn. (95mm diameter)

It can provide quick and accurate measurement to spread sample in thin layer on the pan.

WindowsDirect

Send balance data to Excel or other Windows applications without installing additional data communication software. By combining standard Auto print functions with typical spreadsheet functions, even difficult applications can be easily automated.
You can create graphs easily with WindowsDirect and Excel.

Easy operation using a simple keypad

Features easy-to-operate software and keypad layout. In addition, an automatic starting mode saves measurement time, increasing your work efficiency. Operation simply requires ‘putting material on the pan and shutting the cover’. Internal memory can save 10 measurement conditions and 100 results. Various measurement modes provide extra support.

Various measurement modes
Ending modes:
Automatic ending mode

Automatically ends measurement when moisture loss over the previous 30 seconds becomes smaller than specified percentage.
Automatically ends measurement when the specified amount of time has elapsed.

Alternative drying modes:

Rapid drying mode

First dries with the highest temperature for the specified period, then shifts to the specified temperature, shortening measurement time.

Slow drying mode

Gently heats samples that might solidify at the surface or samples that reduce under high temperature.

Allows step-by-step change in drying conditions. This feature is useful when measuring samples that contain a large amount of water.

Starting mode:

Automatic starting modeStarts measurement immediately after closing the lid. It saves time in repeat measurements.

Capacity	60g 0.02g
Dimension	(W×D×H) mm 202 × 336 × 157
Measurement conditions data memory	10
Interface	RS-232C (9-pin connector) I/O port USB port
Timer setting	1-120 minutes or continuous (max 12 hours)
Measurement modes	Standard (Easy start/Automatic end/Timed end) Rapid drying (Easy start/Automatic end/Timed end) Slow drying (Easy start/Automatic end/Timed end) Step drying (Easy start/Automatic end/Timed end)
Operational temperature and humidity range	5 to 40°C, 85%RH or lower
Weight	4kg
Pan Size	95mm dia
Minimum readability	0.001g 0.01/0.1% (Selectable)
Display	LCD with backlight
Setting	(There is a time restriction when exceeding 180°C.)
Temperature range	50-200°C (1°C increments)
Power	400W
Drying Heater	Straight type halogen heater
Repeatability	0.15% (2g) 0.05% (5g) 0.02% (10g)
Data memory	100

MOC63u

Weighing capacity	60 g
Minimum indication	0.001 g / 0.01%
External output	RS-232C interface USB interface DATA I/O interface